11/20/2023 0 Comments 2006 chevy cobalt ss headlights![]() ![]() It is advised to have the headlights adjusted by a dealer service department or service station as soon as possible. It is important to note that it may not be possible to position the headlight aim exactly for both high and low beams, and if a compromise must be made, prioritizing the proper aim of the low beams is recommended for safety. With the high beams on, the high intensity zone should be vertically centered with the exact center just below the horizontal line. You May Refine Your Search Based On Selections On The Right. Starting with the low beam adjustment, the high intensity zone should be positioned two inches below the horizontal line, and adjustment is made by turning the adjusting screw. Chevrolet Cobalt 2006 Headlights We Found Chevrolet Cobalt 2006 Headlights In Our Catalog. The vehicle should be parked 25 feet from the wall, sitting level, with the gas tank half-full and no heavy load in the vehicle. The tape is positioned vertically on the wall in reference to the vehicle centerline and the centerlines of both headlights, and a horizontal tape line is positioned in reference to the centerline of all the headlights. To adjust the headlights, one method involves using masking tape, a blank wall, and a level floor. There are no horizontal adjustment screws. Our knowledgeable staff has an impressive combined experience of 250 years, and we are ready to serve you today. Please visit our website at or call us toll free at 86. ![]() A: The adjustment procedure for headlights on Cobalt/GS and ION models involves locating the vertical adjustment screws behind each headlight housing, while on HHR models, the vertical adjustment screw is found under the inner fender flange. Transmission Parts Extend the life of your transmission with proper replacement parts straight from the factory.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |